小林设计素材网 客服QQ:178308054 Email:178308054@qq.com 机械设计资料 | 相信专业,相信小林 | 小林机械资料网竭诚为您服务!
首页 | 工艺夹具 | 数控编程 | 注塑模具 | 冲压模具 | 机械机电 | 土木工程 | 采矿通风 | 其他专业 | 购买流程 | 信誉说明 | 付款账号 | 加盟
     
您现在的位置: 主页 > 冲压模具 >
设计名称
密封垫罩冲压工艺与模具设计
设计编号
G039
设计软件
AutoCAD, Word
包含内容
见右侧图片
说明字数
15000字
图纸数量
见右侧图片
推荐指数
较高
价格:
价格优惠中
整理日期
2013.9.26
整理人
小林
购买流程
<查看如何购买本站设计>
设计简介

设计描述:

文档包括:
Word版说明书一份,共29页,约15000字
外文翻译一份


CAD版本图纸,共16张:

 

摘    要
本设计是对给定的产品图进行冲压模具设计。冲压工序的选择是经查阅相关资料和对产品形状仔细分析的基础上进行的;冲压模具的选择是在综合考虑了经济性、零件的冲压工艺性以及复杂程度等诸多因素的基础上进行的;产品毛坯展开尺寸的计算是在方便计算但不影响模具成型的前提下简化为所熟悉的模型进行的。文中还对冲压模具成型零件和其他相关零件的选择原则及选择方法进行了说明。冲压件的设计首先要从冲压生产工艺上对所要设计的密封垫罩进行冲压工艺的分析与计算,然后在分析计算的基础上并参看相关的冲压设计资料确定冲压工艺方案,再在此基础上确定各工序的复合关系后,再进入冲模各具体结构的设计。在此基础上对各副冲压模具的主要零部件的尺寸进行设计与计算,期间要参考大量与冲压相关的资料和翻阅各种《冲压手册》,并通过计算以确定各副模具具体的结构及尺寸,通过不断的计算与修改,并在指导老师的悉心关怀和耐心指导下进行不间断的反复修改,最终确定画出了三副装配图和10副零件图。通过这次毕业设计使我了解和掌握了许多实际的东西,结合我在生产实习中所看所想的一些东西,有了自己的一些收获。在此特别感谢学院,学校各位老师给我的这次机会和悉心指导。

【关键词】冲压工序、冲压模具、毛坯展开尺寸、总布置与校核。


Abstract
This project is a press die design based on the original product. The election of press process is based on consulting correlation datum and analyzing the form of manufactured product meticulous; The election of press die is based on synthesis considerations on economical efficiency、the processing property of part and complex degree iso many factors; Calculating the work blank of manufactured product unfold dimension is lined feed on the premise of calculation convenience but without contribution die confectioning simplified frequent application cast. In the text ,to introduce the election principle and means of press confectioning art and miscellaneous rapport part, otherwise also introducing calculation means on the work blank form of many kinds of product unfold dimension and simplified cast, and the means of looking up on the reference books of designing press die . Only for a pole box press the piece of the design want first from hurtled to press to produce the craft to carry on to a pole of limit box that I want to design hurtled to press the craft of analysis and calculation, then on the analytical and calculating foundation also see also relatedly hurtled to press to design the data assurance to hurtle to press the craft project, again after this foundation up made sure the compound relation of each work preface, then enter blunt the mold is each the design of the concrete structor,On this foundation to main parts of each blunt mold of  size carry on the design and calculation, the period want to consult a great deal of related data and browse the manual, and pass the calculation with the concrete structure and sizes of the assurance, pass the continuous calculation and modify, and at guide the teacher to be concerned with  concentrated effort and guide patiently under carry on modifying again and again without a break, most the assurance rowed three assemble diagrams and ten spare parts diagrams.
I know and grasp some positive things in  the graduate-designing, combinating what I see and think in the delivery practice, I have some harvest. Thanks ever teacher and the school of leaders!
【Key words】Press process , Punch die , The unfold dimension of the workblank , Total arrange to check with school, manufacture .


目      录
摘要  ……………………………………………………………………………1
1. 前言 ……………………………………………………………………………2
2.零件的工艺性分析……………………………………………………………3
3.零件冲压工艺方案的确定……………………………………………………3
3.1冲压工艺方案的计算……………………………………………………………3
3.2确定工艺方案…………………………………………………………………… 6
4.第一副模具(落料,拉深,冲孔,翻边复合模)的设计与计算:……………8
4.1冲裁排样方式的设计及计算:……………………………………………………8
4.2各工序压力的计算……………………………………………………………9
4.3压力机的初步选定……………………………………………………11
4.4模具类型及结构形式的选择与计算:……………………………………………12
4.5模具工作部分刃口尺寸和公差的计算……………………………………14
4.6落料,拉深凸凹模高度的确定………………………………………………17
4.7落料凹模外形尺寸的设计与粗略计算………………………………………17
4.8模具其他零件的设计与计算……………………………………………………18
4.9模具压力中心的设计与计算:…………………………………………………19
5.第二副模具(冲孔、垂直切边模)的设计与计算:……………………………20
5.1各工序压力的计算与压力机的初步选用:……………………………………20
5.2模具工作部分刃口尺寸和公差的计算…………………………………………20
5.3模具结构类型及形式的选择与设计……………………………………………22
5.4压力中心的计算:………………………………………………………………22
5.5冲模闭合高度的计算:………………………………………………………23
5. 6模座的选用………………………………………………………………23
6.第三副模具(水平切边模)的设计与计算:……………………………………24
6.1各工序压力的计算与压力机的初步选用…………………………………………24 6.2模具结构类型及形式的选择与设计……………………………………………25
6.3压力中心的计算……………………………………………………………………25
6.4冲模闭合高度的计算………………………………………………………………25
6.5模座的选用…………………………………………………………………25
总结与体会 ………………………………………………………………………28
致谢词 ……………………………………………………………………………28 
参考文献……………………………………………………………………………29

部分图纸
截图








说明:
如需了解本设计的具体详细信息请联系本站客服,说明看哪个设计(编号)哪个详细部分,我们将远程或截图给您观看.
机械毕业设计|论文
[要求PR≥2,百度收录≥1000页;联系QQ:178308054]
  • pass',
  • 最新选题目录 - 购买流程 - 信誉说明! - 付款账号 - 帮助中心
    声明:根据《互联网传播权保护条例》本站,小林机械资料商城,所列资料均属原创者所有,仅供学习交流之用,请勿转载并做其他非法用途。
    Powered by 小林机械资料商城 © 2013-2020 All Rights Reserved. 客服QQ:178308054
    喜欢www.xiaolinbysj.com,请告诉你QQ上的5位好友,多谢您的支持!