小林设计素材网 客服QQ:178308054 Email:178308054@qq.com 机械设计资料 | 相信专业,相信小林 | 小林机械资料网竭诚为您服务!
首页 | 工艺夹具 | 数控编程 | 注塑模具 | 冲压模具 | 机械机电 | 土木工程 | 采矿通风 | 其他专业 | 购买流程 | 信誉说明 | 付款账号 | 加盟
     
您现在的位置: 主页 > 其他专业 >
设计名称
天津市某四层办公楼中央空调系统设计
设计编号
s177
设计软件
AutoCAD, Word
包含内容
见右侧图片
说明字数
30000字
图纸数量
见右侧图片
推荐指数
较高
价格:
价格优惠中
整理日期
9.26
整理人
小林
购买流程
<查看如何购买本站设计>
设计简介

文档包括:


WORD版本说明书一份,页,约30000字左右.


CAD版本图纸,共17张

 


办公楼中央空调设计

摘 要

本设计为天津市XX公司办公楼中央空调系统,拟为之设计合理的中央空调系统,为室内工作人员提供舒适的工作环境。建筑共四层,总面积为4446.9m2,首层净高4.2m,其他三层净高均为3.9m。要求采用空调夏季制冷冬季供暖。设计的空调系统采用风机盘管—新风系统,选用水冷机组制冷冻水供冷,冬季依靠市政集中供热采暖。
设计的内容包括:选定合适空调系统的类型并确定设计方案,计算部分也十分重要,例如:空调冷负荷的计算;空调系统的划分与系统方案的确定;冷源的选择;风系统的设计与计算;室内送风方式与气流组织形式的选定;水系统的设计、布置与水力计算; 风管系统与水管系统保温层的设计等内容。除此之外,还需要进行空调末端处理设备及机房辅助设备及的选型。需要结合所选择的空调系统的特点及办公楼的建筑结构选择合适的空调机组及末端设备,合理的布置吊顶内风管与水管的位置。并根据所选择的空调机组选配合适的辅助设备:冷冻水循环水泵,冷却水循环水泵


 
THE CENTRAL AIR-CONDITION OF
OFFICIAL BUILDING

ABSTRACT
The design of central air-conditioning system for the building of a Tianjin company is aimed to get a comfortable working condition indoors. The total area of the building is 4446.97 m2. The height of the first floor is 4.2 meters,and the other three floor’heights are all 3.9 meters. The air-condition system is designed to supply cool air in summer, and a fan coil units (FCUs)--fresh air system is selected and central screw water chillers are used to provide the chilling water needed. In winter, the municipal central heating system is used to supply heat and keep official room warm.
Some of the main points in this design are given as follows:
To design an appropriate air-conditioning system for the building, the overall analysis is important. This includes the calculation, such as cooling load calculation, the estimation of system zoning; the design of air duct system and calculation; the estimation of air distribution method and the selection of relevant equipments; the design of water system and the analysis of its resistance losses; the plan of the insulation of air duct and chilled water pipes; etc.. Meanwhile, equipment selection is also an essential part of the design. According to the requirement, a fan coil units (FCUs)--fresh air system is appropriate. Thus,the main process equipment, i.e. the chiller, the fan coil units,  the circulating water pumps, the cooling tower, are also determined in the design considering their characteristics and working conditions.

KEY WORDS: official building, central air conditioning, cooling water chiller
fan coil units (FCUs)--fresh air system
 
目 录
第一章 绪 论 1
第二章 系统方案的选择确定 3
第三章 工程概况 5
§ 3.1建筑特点 5
§ 3.2建筑相关资料 5
§ 3.3室外设计参数 6
§ 3.4室内设计参数 7
第四章 空调负荷计算 8
§ 4.1围护结构瞬变冷负荷计算原理 8
§ 4.1.1外墙和屋面瞬变传热引起的冷负荷 8
§ 4.1.2室内传热维护瞬时冷负荷 8
§ 4.1.3外窗瞬变传热引起的冷负荷 9
§ 4.1.4设备散热形成的冷负荷 9
§ 4.1.5新风冷负荷 11
§ 4.2办公楼围护结构冷负荷计算 11
§ 4.3各房间送风方式的确定 14
§ 4.4 办公楼新风量和新风负荷的确定 15
§ 4.4.1新风负荷计算举例 15
§ 4.4.2办公楼新风冷负荷计算书 16
第五章 风机盘管加新风系统选型计算 21
§ 5.1风机盘管系统选型计算 21
§ 5.2新风机组的选型 24
第六章 空调风系统 25
§ 6.1空调房间气流组织 25
§ 6.2风口的布置 25
§ 6.2.1新风入口注意事项 25
§ 6.2.2风道的布置和制作要求 25
§ 6.2.3新、排风口的防雨百叶尺寸的确定 26
§ 6.2.4风管阀门的选择 26
§ 6.2.5送风口的布置原则 27
§ 6.3 风口的选择 27
§ 6.4 新风管的设计计算 29
§ 6.6 办公区及卫生间排风 31
第七章 空调水系统 32
§ 7.1 空调水系统的选型比较 32
§ 7.2 空调水系统的布置 33
§ 7.3风机盘管水系统水力计算 33
§ 7.3.1基本公式 33
§ 7.3.2标准层的冷冻水供水管路水力计算 34
§ 7.4 办公楼水管最不利循环水利计算 37
§ 7.5 空调风机盘管水系统供、回、凝水管 39
§ 7.6 水管系统中的阀门 40
第八章 机房布置与设备选择 41
§ 8.1机房布置原则 41
§ 8.2机房的设备选择 42
§ 8.2.1冷水机组的选择 42
§ 8.2.2水泵的选择 42
§ 8.2.3定压补水水箱选择 44
§ 8.2.4冷却水塔、水箱的选择计算 46
第九章 管道保温、防腐 47
结  论 48
参考文献 49
致 谢 50
附 录 51

部分图纸
截图




说明:
如需了解本设计的具体详细信息请联系本站客服,说明看哪个设计(编号)哪个详细部分,我们将远程或截图给您观看.
机械毕业设计|论文
[要求PR≥2,百度收录≥1000页;联系QQ:178308054]
  • pass',
  • 最新选题目录 - 购买流程 - 信誉说明! - 付款账号 - 帮助中心
    声明:根据《互联网传播权保护条例》本站,小林机械资料商城,所列资料均属原创者所有,仅供学习交流之用,请勿转载并做其他非法用途。
    Powered by 小林机械资料商城 © 2013-2020 All Rights Reserved. 客服QQ:178308054
    喜欢www.xiaolinbysj.com,请告诉你QQ上的5位好友,多谢您的支持! 皖ICP备2021006205号-1 辰光云统计平台