设计描述：

文档包括:
word说明书一份，共26页，约13000字

SolidWorks三维版本图纸，一套

基于SolidWorks的车床运动建模与仿真

摘  要
众所周知，产品的建模与仿真作为产品设计的一个重要环节，是产品功能实现的主要过程。良好的建模、装配和仿真技术，对保证产品质量和可靠性，降低产品成本和提高竞争力具有十分重要的意义。随着信息技术和制造业信息化的飞速发展，建模仿真技术的发展及应用将成为必然趋势。本课题利用SolidWorks平台对CA6140车床的装配过程进行了一些必要的探讨和仿真分析。
首先，从国内外研究现状、车床的介绍、零件的建模和装配模型的建立等方面系统的阐述了建模仿真的理论知识、原理以及技术要点。
其次，对三维造型软件SolidWorks作了简单的介绍，对其插件的功能进行了学习和探索，掌握的参数化的建模方法，大大缩短了设计时间，提高了设计效率和设计质量，较好地完成了研制设计任务。这样做对于缩短产品的研制周期，降低研制成本有着显著作用。
最后，通过以上仿真将机床的传动情况直观地显示了出来，取得了较好的直观效果。而且结合本课题对今后的工作进行了展望，为整机的可装配性分析及性能评价奠定了基础。

关键词: CA6140车床，SolidWorks，建模，仿真
 

Lathe Modeling and Simulation of the Movement Based on SolidWorks

Abstract
As we all know,modeling and simulation products,product design as an important element of the main functions of the product process. Good modeling, assembly and simulation technology, to ensure product quality and reliability,reduce costs and enhance competitiveness force of great significance.As information technology and manufacturing the rapid development of information technology, modeling and simulation technology. The development and application will become an inevitable trend. SolidWorks platform of the subject of the use of the CA6140 lathe assembly process of the necessary analysis and simulation.
First of all,research from home and abroad,introduction of lathes,parts modeling and assembly modeling system and so on modeling and simulation on the theory of knowledge,and technical points of principle.
Secondly,three-dimensional modeling software,SolidWorks gave a brief account of its plug-in function of learning and exploration,Grasp of the parameters of the modeling method,greatly reducing the design time and improve design efficiency and design quality,development of better design task was completed. That will do little to shorten the product development cycle,lower development costs have a significant role.
Finally,through the above-mentioned machine tool simulation of transmission cases will show up directly to obtain a better visual effect. And connection with the subject of future work prospects for the whole analysis can be assembled and laid the foundation for performance evaluation.
Key words:  CA6140 lathe, SolidWorks, Modeling, Simulation

 
 目  录

1 绪论 1
1.1 引言 1
1.2 国内外研究现状 2
1.3 课题目的及所研究的主要内容 3
1.3.1 课题的目的 3
1.4 CA6140车床简介 4
1.4.1 CA6140车床简介 4
1.4.2 CA6140车床的传动系统 4
2 SolidWorks软件平台. 4
2.1 SolidWorks及其二次开发技术简介 4
2.1.1 三维造型软件SolidWorks简介 4
2.1.2 基于SolidWorks的二次开发技术. 5
2.2 SolidWorks插件 5
2.2.1 PhotoWorks 5
2.2.2 FeatureWorks 6
2.2.3 COSMOSXpress 6
2.2.4 Toolbox 6
2.3 SolidWorks在产品设计中的功能 7
2.4 三维实体零件的建模 7
2.4.1 参数化建模方法（参数化设计） 7
2.4.2 一般建模方法 9
2.5 三维实体零件的装配 9
2.5.1 向装配体中添加实体零件. 9
3 车床的建模 10
3.1 轴的建模 10
3.2 齿轮、链轮的建模 11
3.3 凸轮的建模 14
3.4 拨叉的建模 14
3.5 机架、定位块、销钉的建模 16
4 车床的装配 17
4.1 装配顺序的原则 17
5 车床的仿真 18
5.1 Animator介绍 18
5.2 车床传动仿真的实现 19
6 结论与展望 19
6.1 结论 19
6.2 今后工作方向 20
致谢 21
参考文献 21