设计描述:
文档包括:
Word版设计说明书1份,共108页,约38000字
外文翻译一份
CAD版本图纸,共7张
目 录
摘 要 1
abstract 2
第一篇 选型设计 3
第一章 矿山运输机械选型设计 3
第一节 原始资料概述 3
第二节 工作面刮板输送机的选型 5
第三节 顺槽输送设备选型设计 8
第四节 上山输送机选型设计 13
第五节 电机车选型设计 15
第二章 矿井提升机械选型设计 21
第一节 原始资料概述 21
第二节 一次提升量的确定 21
第三节 提升钢丝绳选择计算 24
第四节 矿井提升机选型计算 26
第五节 天轮的选择计算 28
第六节 与井筒相对位置的计算 28
第七节 提升系统变位质量的计算 31
第八节 运动学计算 32
第九节 动力学计算 34
第十节 验算电动机的容量 38
第十一节 提升设备电耗及效率的计算 39
第二篇 支撑掩护式液压支架液压系统设计 41
第一章 概述 41
第一节 设计任务书 41
第二节 液压支架液压系统的特点 42
第二章 液压支架的液压系统设计 43
第一节 液压系统的拟定 43
第二节 液压元件和管路的设计 50
第三节 泵站的选取及主要参数的确定 71
第三章 液压支架的组成及工作原理 72
第一节 液压支架的组成 72
第二节 本液压支架的液压系统 79
第三节 本液压支架的工作原理 81
第四章 液压支架在工作面的布置与移动方式 83
第五章 液压支架的支撑承载原理 84
第六章 阀组 87
第七章 支架的操作,维修及故障处理 92
第一节 支架的操作维修、拆装搬运时的注意事项 92
第二节 支架各主要部件常见的故障及处理措施 93
第八章 液压支架的发展方向 95
结束语 96
参考文献 97
英文原文 98
中文译文 100
致 谢 102
煤矿运输、提升机械选型设计及支撑掩护式液压支架液压系统的设计
摘 要
本次毕业设计的题目是“煤矿运输、提升机械选型设计及支撑掩护式液压支架液压系统的设计”,其主要任务有两项:第一项是煤矿运输、提升设备选型的设计;第二项是支撑掩护式液压支架液压系统的设计。
在设备选型设计中,首先对原始资料进行分析,根据生产过程及其它要求来确定其设备的型号,然后进行校核,最后确定设备的规格及其工作参数。在支撑掩护式液压支架液压系统的设计中,首先是根据原始资料自选液压支架,其次就是对液压系统原理的拟定,然后根据工作特点进行液压元件及管路的设计,同时对液压泵站进行选取及其各种参数的确定,最后对支架的操作、维护及其故障处理的办法做了详细的介绍。
关键词:煤矿运输 煤矿提升
支撑掩护式液压支架 液压系统
Abstract
The graduation design is entitled of “coal transportation, upgrading machinery selection design and support for the cover of the hydraulic support of the hydraulic system the design”. There are two main tasks: one task is that the design of the coal transportation, upgrading equipment selection ;the other is that the design of support for the cover of the hydraulic support of the hydraulic system.
In the selection of equipment design, the first we should analysis the original data and determine their equipment models according to the production process and other requirements, futhermore, check it and determine the specifications of equipment and operating parameters. In the design of the “support for the cover of the hydraulic support of the hydraulic system” , firstly,we should select the hydraulic support in accordance with the original information; then we should decide the principle of the hydraulic system; then we should design the hydraulic components and the pipeline basis on thecharacteristics; Meanwhile,we should select the hydraulic pump and determine the various parameters; Finally,we should introduce specifically the method of support’s operation, maintenance and troubleshooting determination.
Keywords: The coal mine transports The coal mine upgrade
Support for the cover of the hydraulic support Hydraulic system
|